Barudan XS/XY series

Barudan A28: Calculating Please wait

message Updated 2026-11-18
Quick answer Barudan A28 means The control is busy calculating and is asking the operator to wait. Buttons should not be pressed until the message disappears. First check: This is a message that the machine is busy.

What it means

The control is busy calculating and is asking the operator to wait. Buttons should not be pressed until the message disappears.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

What the manual says to check

  1. This is a message that the machine is busy.
  2. Wait till the message disappears before pressing any buttons.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan A28 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan A28 mean?

Barudan A28 means: The control is busy calculating and is asking the operator to wait. Buttons should not be pressed until the message disappears. It is an informational message, not a fault.

How do I clear Barudan A28?

Start with: This is a message that the machine is busy. Then: Wait till the message disappears before pressing any buttons.

When should I call a technician for Barudan A28?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.