Tajima 30: Stop command by bar switch is given during execution of mode 5, 6,…
What it means
Stop command by bar switch is given during execution of mode 5, 6, offset or home return.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
What the manual says to check
- Release the bar switch, then press START to continue.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 30 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 30 mean?
Tajima 30 means: Stop command by bar switch is given during execution of mode 5, 6, offset or home return. It is an error code and should be cleared before production.
How do I clear Tajima 30?
Start with: Release the bar switch, then press START to continue.
When should I call a technician for Tajima 30?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.