SWF shop-floor reports

SWF Not Load Design: Not load design

message memorydesign Updated 2026-11-20
Quick answer SWF Not Load Design means The machine has no design loaded, or its internal memory is full. First check: Check that a design is actually loaded for the head you are about to sew.

What it means

The machine has no design loaded, or its internal memory is full.

This page is generated from a public source: DigitSmith forum — SWF 1201 “Not Load Design”. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged memory, design. Browse all memory codes.

What the source says to check

  1. Check that a design is actually loaded for the head you are about to sew.
  2. Load the design from USB or serial rather than from memory.
  3. If the memory is full, delete stored designs from the machine.
  4. Power-cycle the machine: one owner saw the message clear after several restarts.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send SWF Not Load Design to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related SWF codes

FAQ

What does SWF Not Load Design mean?

SWF Not Load Design means: The machine has no design loaded, or its internal memory is full. It is an informational message, not a fault.

How do I clear SWF Not Load Design?

Start with: Check that a design is actually loaded for the head you are about to sew. Then: Load the design from USB or serial rather than from memory. Then: If the memory is full, delete stored designs from the machine.

When should I call a technician for SWF Not Load Design?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: DigitSmith forum — SWF 1201 “Not Load Design”. Shop-floor reports from a forum thread, not manufacturer documentation. Replies: “no design in memory, load from floppy/serial/USB”, and “if the memory is too full it will not load, delete stored designs”.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.