Design codes on embroidery machines

41 manual-derived design codes and messages across Barudan, SWF, Tajima. Design codes come from the stitch file, the hoop, or the path the machine is trying to sew. The machine is usually telling you the file and the setup do not agree.

What to check first

  • Check the design against the hoop and the machine's field.
  • Re-send the design and confirm the file is not corrupt.
  • Check the machine's memory and the transfer method.

General checks for the system, not a substitute for the code page or the manual.

Browse this system by brand

Barudan (16)SWF (2)Tajima (23)

Or see all 188 codes.

Every design code in the dataset

BrandCodeMeaningType
BarudanA05Wrong Tape Code or BAUD Rate Errorerror
BarudanA08Memory is Full or Design Memory Read Errorerror
BarudanA11No PC or peripheral device connectederror
BarudanA21All Memory Slots are Emptymessage
BarudanA24No More Color Change Codes Foundmessage
BarudanA27No more Function Codes Foundmessage
BarudanA29Memory is Fullmessage
BarudanA34Too Many Color Changes in Designmessage
BarudanA37USB Memory Device is D Fullmessage
BarudanA40Network Errorerror
BarudanA41Design data reading errorerror
BarudanD08Frame Limit Errorerror
BarudanD19Stopped for Stop Codestop code
BarudanD23Stopped for Appliquéstop code
BarudanD27Stopped for Temporary Repair Stopstop code
BarudanD32Stopped for Sub End Codestop code
SWF707Doc broken / flash memoryerror
SWFNot Load DesignNot load designmessage
Tajima02Tajima tape complement error. ( The same +/-- numerics are entered…error
Tajima12Excessive stitch backerror
Tajima16Tape format 5 is selected although no designs are stored in memoryerror
Tajima17After 30 designs have been stored in memory, tape format 2, or 4…error
Tajima18After the data setting, the number of that design is erasederror
Tajima19Memory capacity shortage during editingerror
Tajima2B1No response from serial deviceerror
Tajima2B2TAJIMA code complement error. Same + anderror
Tajima2B3Data exists in an end codeerror
Tajima2C3"Pack" is not designatederror
Tajima2B4Code format error (A stitch code does not exist at the third…error
Tajima2C4The design stitch count is exceedederror
Tajima2B5Reading error, stitch data over 5.1 mmerror
Tajima2B8When the pre-reading buffer becomes emptyerror
Tajima221The frame has traveled left, exceeding the position set by the…error
Tajima222The frame has traveled right, exceeding the position set by the…error
Tajima223The frame has traveled up, exceeding the position set by the frame…error
Tajima224The frame has traveled down, exceeding the position set by the…error
Tajima225Travel outside the set embroidery areaerror
Tajima3D1There is abnormality in a battery backup signalerror
Tajima3D2There is abnormality in a battery backup signalerror
Tajima385Lens does not move to the designated position when during lense…error
Tajima60The embroidery space of the cap frame is exceedederror
Machine down right now? Send the code and model. We’ll reply with the next step.
Request a repair callback →

FAQ

What does a design code mean on an embroidery machine?

It means the controller found a problem in the design system. The exact meaning depends on the brand, model, and code; the table above lists every design row in the FaultDesk dataset with its meaning and source.

Which brands are covered on this page?

Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.

Where do these codes come from?

Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.

Source: public manufacturer manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.