Communication codes on embroidery machines
10 manual-derived communication codes and messages across Barudan, Tajima. Communication codes cover the link between the machine and a PC, USB drive, or network. The machine and the other end are not agreeing.
What to check first
- Check the cable and the port at both ends.
- Restart the machine and the sending application.
- Re-send the design; if it fails at the same byte, suspect the file.
General checks for the system, not a substitute for the code page or the manual.
Every communication code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | A05 | Wrong Tape Code or BAUD Rate Error | error |
| Barudan | A11 | No PC or peripheral device connected | error |
| Barudan | A40 | Network Error | error |
| Barudan | D30 | Head/Duct Board Switch Mo ON Error pr bo da | error |
| Barudan | D31 | Driver Box/Board Communication Error | error |
| Tajima | 09 | PTR motion is in disorder. Reader does not read the tape for more… | error |
| Tajima | 2B1 | No response from serial device | error |
| Tajima | 2B6 | The serial interface is not ready | error |
| Tajima | 3B5 | Communication error in the controller | error |
| Tajima | 3B6 | Communication problem | error |
FAQ
What does a communication code mean on an embroidery machine?
It means the controller found a problem in the communication system. The exact meaning depends on the brand, model, and code; the table above lists every communication row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.