Barudan XS/XY series

Barudan D30: Head/Duct Board Switch Mo ON Error pr bo da

error communication Updated 2026-11-18
Quick answer Barudan D30 means More than two switches on the head/duct board are on at the same time. The source says to check for an unplugged or damaged cable between the boards and to call technical support. First check: More than 2 switches on the Head/Duct board are On.

What it means

More than two switches on the head/duct board are on at the same time. The source says to check for an unplugged or damaged cable between the boards and to call technical support.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged communication. Browse all communication codes or all Barudan communication codes.

What the manual says to check

  1. More than 2 switches on the Head/Duct board are On.
  2. Check for an unplugged or damaged cable from one board; a bad cable can cause this error Call tech support.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D30 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D30 mean?

Barudan D30 means: More than two switches on the head/duct board are on at the same time. The source says to check for an unplugged or damaged cable between the boards and to call technical support. It is an error code and should be cleared before production.

How do I clear Barudan D30?

Start with: More than 2 switches on the Head/Duct board are On. Then: Check for an unplugged or damaged cable from one board; a bad cable can cause this error Call tech support.

When should I call a technician for Barudan D30?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.