Barudan XS/XY series

Barudan A05: Wrong Tape Code or BAUD Rate Error

error designcommunication Updated 2026-11-18
Quick answer Barudan A05 means The tape-code or BAUD-rate setting used to send a design does not match the machine's IN COM setting, so the transfer is rejected. The source notes Barudan uses U code, Tajima EL and ZSK F, and requires both ends to use the same BAUD rate. First check: When sending a design via cable from a PC to the machine, the tape code setting on the PC must match the setting set on the machine in “IN COM” mode, otherwise you’ll get this error. Barudan = U code Tajima = EL code ZSK = F code Make sure the PC transfer machine setting matches the Machine “In COM” tape setting.

What it means

The tape-code or BAUD-rate setting used to send a design does not match the machine's IN COM setting, so the transfer is rejected. The source notes Barudan uses U code, Tajima EL and ZSK F, and requires both ends to use the same BAUD rate.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged design, communication. Browse all design codes or all Barudan design codes.

What the manual says to check

  1. When sending a design via cable from a PC to the machine, the tape code setting on the PC must match the setting set on the machine in “IN COM” mode, otherwise you’ll get this error. Barudan = U code Tajima = EL code ZSK = F code Make sure the PC transfer machine setting matches the Machine “In COM” tape setting.
  2. Also check that the BAUD rate setting on the machine matches the BAUD output from the PC software program. They must match or you’ll get this error. Call tech or software support to help diagnose.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan A05 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan A05 mean?

Barudan A05 means: The tape-code or BAUD-rate setting used to send a design does not match the machine's IN COM setting, so the transfer is rejected. The source notes Barudan uses U code, Tajima EL and ZSK F, and requires both ends to use the same BAUD rate. It is an error code and should be cleared before production.

How do I clear Barudan A05?

Start with: When sending a design via cable from a PC to the machine, the tape code setting on the PC must match the setting set on the machine in “IN COM” mode, otherwise you’ll get this error. Barudan = U code Tajima = EL code ZSK = F code Make sure the PC transfer machine setting matches the Machine “In COM” tape setting. Then: Also check that the BAUD rate setting on the machine matches the BAUD output from the PC software program. They must match or you’ll get this error. Call tech or software support to help diagnose.

When should I call a technician for Barudan A05?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.