Laser codes on embroidery machines

6 manual-derived laser codes and messages across Tajima. Laser codes cover the positioning laser and its alignment. They are usually a laser that is off, blocked, or out of alignment.

What to check first

  • Check the laser is enabled and the lens is clean.
  • Check the connector and the mounting bracket.
  • Re-align only with the procedure in the manual.

General checks for the system, not a substitute for the code page or the manual.

Browse this system by brand

Tajima (6)

Or see all 188 codes.

Every laser code in the dataset

BrandCodeMeaningType
Tajima2D1Initial setting of laser power is not completeerror
Tajima2C2ON is set for both boring and laser unit)error
Tajima2C5An attempt was made to carry out laser processing during laser…error
Tajima234Faulty laser uniterror
Tajima253Lower limit of the laser protect cover is not detectederror
Tajima254Upper limit of the laser protect cover is not detectederror
Machine down right now? Send the code and model. We’ll reply with the next step.
Request a repair callback →

FAQ

What does a laser code mean on an embroidery machine?

It means the controller found a problem in the laser system. The exact meaning depends on the brand, model, and code; the table above lists every laser row in the FaultDesk dataset with its meaning and source.

Which brands are covered on this page?

Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.

Where do these codes come from?

Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.

Source: public manufacturer manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.