Tajima error list

Tajima 253: Lower limit of the laser protect cover is not detected

error sensorlaserpneumatic Updated 2026-11-18
Quick answer Tajima 253 means Lower limit of the laser protect cover is not detected. First check: Check/replace the lower limit sensor, check/adjust air pressure.

What it means

Lower limit of the laser protect cover is not detected.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged sensor, laser, pneumatic. Browse all sensor codes or all Tajima sensor codes.

What the manual says to check

  1. Check/replace the lower limit sensor, check/adjust air pressure.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 253 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 253 mean?

Tajima 253 means: Lower limit of the laser protect cover is not detected. It is an error code and should be cleared before production.

How do I clear Tajima 253?

Start with: Check/replace the lower limit sensor, check/adjust air pressure.

When should I call a technician for Tajima 253?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.