Tajima error list

Tajima 2C5: An attempt was made to carry out laser processing during laser…

error laser Updated 2026-11-18
Quick answer Tajima 2C5 means An attempt was made to carry out laser processing during laser preheating. First check: Wait until preheating is complete.

What it means

An attempt was made to carry out laser processing during laser preheating.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged laser. Browse all laser codes or all Tajima laser codes.

What the manual says to check

  1. Wait until preheating is complete.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 2C5 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 2C5 mean?

Tajima 2C5 means: An attempt was made to carry out laser processing during laser preheating. It is an error code and should be cleared before production.

How do I clear Tajima 2C5?

Start with: Wait until preheating is complete.

When should I call a technician for Tajima 2C5?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.