Tajima error list

Tajima 17: After 30 designs have been stored in memory, tape format 2, or 4…

error memorydesign Updated 2026-11-18
Quick answer Tajima 17 means After 30 designs have been stored in memory, tape format 2, or 4 was selected. First check: Only 30 designs can be stored in memory.

What it means

After 30 designs have been stored in memory, tape format 2, or 4 was selected.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged memory, design. Browse all memory codes or all Tajima memory codes.

What the manual says to check

  1. Only 30 designs can be stored in memory.
  2. Remove unnecessary designs.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 17 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 17 mean?

Tajima 17 means: After 30 designs have been stored in memory, tape format 2, or 4 was selected. It is an error code and should be cleared before production.

How do I clear Tajima 17?

Start with: Only 30 designs can be stored in memory. Then: Remove unnecessary designs.

When should I call a technician for Tajima 17?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.