Pneumatic codes on embroidery machines
7 manual-derived pneumatic codes and messages across Barudan, Tajima. Pneumatic codes cover air pressure, valves, and the air supply. The machine needs pressure to clamp, trim, or move an actuator.
What to check first
- Check the air supply and the main valve.
- Drain the filter and check the regulator.
- Look for a disconnected hose or a leaking fitting.
General checks for the system, not a substitute for the code page or the manual.
Every pneumatic code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D12 | Trimmer slider error | error |
| Barudan | D27 | Stopped for Temporary Repair Stop | stop code |
| Tajima | 2B1 | No response from serial device | error |
| Tajima | 252 | The status of the air valve (vacuum) does not change | error |
| Tajima | 253 | Lower limit of the laser protect cover is not detected | error |
| Tajima | 254 | Upper limit of the laser protect cover is not detected | error |
| Tajima | 385 | Lens does not move to the designated position when during lense… | error |
FAQ
What does a pneumatic code mean on an embroidery machine?
It means the controller found a problem in the pneumatic system. The exact meaning depends on the brand, model, and code; the table above lists every pneumatic row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.