Tajima 385: Lens does not move to the designated position when during lense…
What it means
Lens does not move to the designated position when during lense switching.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged sensor, design, pneumatic. Browse all sensor codes or all Tajima sensor codes.
What the manual says to check
- Check/adjust/replace: compressor pressure, sensor, sensor wiring, electromagnetic valve & wiring, lens fulcrum axis and shaft.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 385 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 385 mean?
Tajima 385 means: Lens does not move to the designated position when during lense switching. It is an error code and should be cleared before production.
How do I clear Tajima 385?
Start with: Check/adjust/replace: compressor pressure, sensor, sensor wiring, electromagnetic valve & wiring, lens fulcrum axis and shaft.
When should I call a technician for Tajima 385?
If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.