Barudan XS/XY series

Barudan D12: Trimmer slider error

error threadtrimmerpneumatic Updated 2026-11-18
Quick answer Barudan D12 means The trimmer slider is stuck down or caught on un-trimmed thread. The source says to free the thread by hand, then check and adjust the trimmers or clean the slider so it moves smoothly. First check: Trimmer slider is stuck in down position or caught on un-trimmed thread.

What it means

The trimmer slider is stuck down or caught on un-trimmed thread. The source says to free the thread by hand, then check and adjust the trimmers or clean the slider so it moves smoothly.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, trimmer, pneumatic. Browse all thread codes or all Barudan thread codes.

What the manual says to check

  1. Trimmer slider is stuck in down position or caught on un-trimmed thread.
  2. If caught on un-trimmed thread, break thread by hand and pull about 2 inches (50mm) of thread before letting the trimmer slider pull thread up into the thread catch.
  3. If machine continues to have D12 errors because it’s not trimming, check and adjust the trimmers.
  4. Replace blades and wave washer if necessary.
  5. If D12 is happening because slider is sticking, check slider operation by hand and clean or repair as necessary for smooth operation.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D12 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D12 mean?

Barudan D12 means: The trimmer slider is stuck down or caught on un-trimmed thread. The source says to free the thread by hand, then check and adjust the trimmers or clean the slider so it moves smoothly. It is an error code and should be cleared before production.

How do I clear Barudan D12?

Start with: Trimmer slider is stuck in down position or caught on un-trimmed thread. Then: If caught on un-trimmed thread, break thread by hand and pull about 2 inches (50mm) of thread before letting the trimmer slider pull thread up into the thread catch. Then: If machine continues to have D12 errors because it’s not trimming, check and adjust the trimmers.

When should I call a technician for Barudan D12?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.