Tajima 1B3: Stop due to end code 1
What it means
The machine stopped at end code 1 in the design. The source treats these stop codes as normal programmed stops and says any operation key except the manual frame-travel keys will continue.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged frame. Browse all frame codes or all Tajima frame codes.
What the manual says to check
- Press any operation key (except the manual frame travel keys) to continue.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 1B3 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 1B3 mean?
Tajima 1B3 means: The machine stopped at end code 1 in the design. The source treats these stop codes as normal programmed stops and says any operation key except the manual frame-travel keys will continue. It is a stop code, not necessarily a fault.
How do I clear Tajima 1B3?
Start with: Press any operation key (except the manual frame travel keys) to continue.
When should I call a technician for Tajima 1B3?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.