Tajima 1C2: Stop by manual ATH operation
What it means
The machine stopped because the ATH was operated manually. The source says to start the machine or conduct frame forward/back to continue.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged frame. Browse all frame codes or all Tajima frame codes.
What the manual says to check
- Either start the machine or conduct frame back/forward.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 1C2 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 1C2 mean?
Tajima 1C2 means: The machine stopped because the ATH was operated manually. The source says to start the machine or conduct frame forward/back to continue. It is a stop code, not necessarily a fault.
How do I clear Tajima 1C2?
Start with: Either start the machine or conduct frame back/forward.
When should I call a technician for Tajima 1C2?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.