Frame codes on embroidery machines

29 manual-derived frame codes and messages across Barudan, SWF, Tajima. Frame codes cover pantograph movement, travel limits, and the frame drive. A frame code can be a jam, a loose belt, or a limit switch.

What to check first

  • Stop the machine and look for an obstruction or a caught garment.
  • Confirm the frame is seated and the hoop is not hitting the arm.
  • Do not force the axis; check the belt and the motor connector.

General checks for the system, not a substitute for the code page or the manual.

Browse this system by brand

Barudan (7)SWF (1)Tajima (21)

Or see all 188 codes.

Every frame code in the dataset

BrandCodeMeaningType
BarudanA26Sock Frame Origin Not Seterror
BarudanA35Spectacle Frame Errormessage
BarudanA36Appliqué Errormessage
BarudanD08Frame Limit Errorerror
BarudanD26Pulse Motor Circuit Overheaterror
BarudanD29Servo Driver Errorerror
BarudanD41Chenille Needle Height Errorerror
SWF300Needle position signalerror
Tajima1B1Stop due to frame stepping codestop code
Tajima1C1Stop occurred because bar switch was pressed during frame steppingstop code
Tajima1B2Stop due to stop codestop code
Tajima1C2Stop by manual ATH operationstop code
Tajima13Prohibited forward ( When offset is set)error
Tajima1B3Stop due to end code 1stop code
Tajima2C1The machine is started or frame forward/back is executed during…error
Tajima2B7The machine was started or frame forward was performed although…error
Tajima2B8When the pre-reading buffer becomes emptyerror
Tajima221The frame has traveled left, exceeding the position set by the…error
Tajima222The frame has traveled right, exceeding the position set by the…error
Tajima223The frame has traveled up, exceeding the position set by the frame…error
Tajima224The frame has traveled down, exceeding the position set by the…error
Tajima225Travel outside the set embroidery areaerror
Tajima226Absolute origin limit (+X, -Y) detectederror
Tajima228Table up/down operation was attempted although the frame was in…error
Tajima324Frame feed output when the needle penetrates the fabricerror
Tajima325Absolute origin could not be detected on the X or Y axis. Cap…error
Tajima52Frame limit switch activatederror
Tajima59The cap frame moves more than 75mm from the cap frame zero point…error
Tajima60The embroidery space of the cap frame is exceedederror
Machine down right now? Send the code and model. We’ll reply with the next step.
Request a repair callback →

FAQ

What does a frame code mean on an embroidery machine?

It means the controller found a problem in the frame system. The exact meaning depends on the brand, model, and code; the table above lists every frame row in the FaultDesk dataset with its meaning and source.

Which brands are covered on this page?

Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.

Where do these codes come from?

Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.

Source: public manufacturer manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.