Tajima error list

Tajima 2B5: Reading error, stitch data over 5.1 mm

error design Updated 2026-11-18
Quick answer Tajima 2B5 means The reader found stitch data longer than 5.1 mm, which the control cannot read as a normal stitch. The source says to correct the data. First check: Correct data.

What it means

The reader found stitch data longer than 5.1 mm, which the control cannot read as a normal stitch. The source says to correct the data.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged design. Browse all design codes or all Tajima design codes.

What the manual says to check

  1. Correct data.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 2B5 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 2B5 mean?

Tajima 2B5 means: The reader found stitch data longer than 5.1 mm, which the control cannot read as a normal stitch. The source says to correct the data. It is an error code and should be cleared before production.

How do I clear Tajima 2B5?

Start with: Correct data.

When should I call a technician for Tajima 2B5?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.