Tajima error list

Tajima 224: The frame has traveled down, exceeding the position set by the…

error framedesign Updated 2026-11-18
Quick answer Tajima 224 means The frame has traveled down, exceeding the position set by the frame limit. First check: Move the frame manually so the design fits inside the embroidery area.

What it means

The frame has traveled down, exceeding the position set by the frame limit.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged frame, design. Browse all frame codes or all Tajima frame codes.

What the manual says to check

  1. Move the frame manually so the design fits inside the embroidery area.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 224 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 224 mean?

Tajima 224 means: The frame has traveled down, exceeding the position set by the frame limit. It is an error code and should be cleared before production.

How do I clear Tajima 224?

Start with: Move the frame manually so the design fits inside the embroidery area.

When should I call a technician for Tajima 224?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.