Tajima error list

Tajima 2C3: "Pack" is not designated

error design Updated 2026-11-18
Quick answer Tajima 2C3 means The design calls for a pack but no pack is designated in the control. The source says to designate packed designs. First check: Designate packed designs.

What it means

The design calls for a pack but no pack is designated in the control. The source says to designate packed designs.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged design. Browse all design codes or all Tajima design codes.

What the manual says to check

  1. Designate packed designs.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 2C3 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 2C3 mean?

Tajima 2C3 means: The design calls for a pack but no pack is designated in the control. The source says to designate packed designs. It is an error code and should be cleared before production.

How do I clear Tajima 2C3?

Start with: Designate packed designs.

When should I call a technician for Tajima 2C3?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.