Tajima error list

Tajima 2E3: Power supply has been interrupted during embroidery

error power Updated 2026-11-18
Quick answer Tajima 2E3 means Power supply has been interrupted during embroidery. First check: Turn ON the power and perform "Power Resume" operation.

What it means

Power supply has been interrupted during embroidery.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged power. Browse all power codes or all Tajima power codes.

What the manual says to check

  1. Turn ON the power and perform "Power Resume" operation.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 2E3 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 2E3 mean?

Tajima 2E3 means: Power supply has been interrupted during embroidery. It is an error code and should be cleared before production.

How do I clear Tajima 2E3?

Start with: Turn ON the power and perform "Power Resume" operation.

When should I call a technician for Tajima 2E3?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.