Tajima error list

Tajima 211: A fixed position signal is not detected. Main shaft Z signal

error motorencodersensor Updated 2026-11-18
Quick answer Tajima 211 means A fixed position signal is not detected. Main shaft Z signal. First check: Return the main shaft to the fixed position Check the encoder signal.

What it means

A fixed position signal is not detected. Main shaft Z signal.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor, encoder, sensor. Browse all motor codes or all Tajima motor codes.

What the manual says to check

  1. Return the main shaft to the fixed position Check the encoder signal.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 211 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 211 mean?

Tajima 211 means: A fixed position signal is not detected. Main shaft Z signal. It is an error code and should be cleared before production.

How do I clear Tajima 211?

Start with: Return the main shaft to the fixed position Check the encoder signal.

When should I call a technician for Tajima 211?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.