Tajima power error codes

The 13 Tajima rows tagged power in the FaultDesk dataset. Power codes cover the supply, the emergency stop, and the power board. They are the codes where guessing is most expensive.

What to check first

  • Check the emergency stop and the safety switches first.
  • Check the supply voltage and the plug.
  • If the code names a board or a driver, call a technician.

System-level checks. Open the code page for the manual’s steps.

CodeMeaningType
2D1Initial setting of laser power is not completeerror
2C2ON is set for both boring and laser unit)error
2E3Power supply has been interrupted during embroideryerror
234Faulty laser uniterror
3C1Power switched on while bar switch was heldstop code
3D1There is abnormality in a battery backup signalerror
3D2There is abnormality in a battery backup signalerror
3E2The p24R power supply is abnormalerror
3D3There is abnormality in a battery backup signalerror
3B5Communication error in the controllererror
314Main shaft rotation failureerror
382The needle position signal status during color change does not…error
384Control error of the looper shaft driveerror

See all power codes across brands, or the Tajima hub.

Machine down right now? Send the Tajima code and model. We’ll reply with the next step.
Request a repair callback →
Source: public manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.