Tajima 314: Main shaft rotation failure
What it means
The main shaft did not rotate as expected. The source says to check the encoder and its signal line, the main motor and belt, and the main breaker.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged motor, encoder, sensor, power. Browse all motor codes or all Tajima motor codes.
What the manual says to check
- Check the encoder/encoder signal line, main motor and belt Main breaker.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 314 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 314 mean?
Tajima 314 means: The main shaft did not rotate as expected. The source says to check the encoder and its signal line, the main motor and belt, and the main breaker. It is an error code and should be cleared before production.
How do I clear Tajima 314?
Start with: Check the encoder/encoder signal line, main motor and belt Main breaker.
When should I call a technician for Tajima 314?
If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.