Tajima error list

Tajima 384: Control error of the looper shaft drive

error power Updated 2026-11-18
Quick answer Tajima 384 means The looper-shaft drive motor did not give the expected one-rotation signal while the main shaft was running. The source says to power-cycle and, if it persists, replace the head card for the affected CE head. First check: Turn off the power, and then turn it on again.

What it means

The looper-shaft drive motor did not give the expected one-rotation signal while the main shaft was running. The source says to power-cycle and, if it persists, replace the head card for the affected CE head.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged power. Browse all power codes or all Tajima power codes.

What the manual says to check

  1. Turn off the power, and then turn it on again.
  2. If code 384 is still displayed, replace.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 384 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 384 mean?

Tajima 384 means: The looper-shaft drive motor did not give the expected one-rotation signal while the main shaft was running. The source says to power-cycle and, if it persists, replace the head card for the affected CE head. It is an error code and should be cleared before production.

How do I clear Tajima 384?

Start with: Turn off the power, and then turn it on again. Then: If code 384 is still displayed, replace.

When should I call a technician for Tajima 384?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.