Tajima error list

Tajima 3C1: Power switched on while bar switch was held

stop code power Updated 2026-11-18
Quick answer Tajima 3C1 means Power switched on while bar switch was held. First check: Turn off the power switch, and then turn it on.

What it means

Power switched on while bar switch was held.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged power. Browse all power codes or all Tajima power codes.

What the manual says to check

  1. Turn off the power switch, and then turn it on.
  2. If code 3C1 is still displayed, check the bar switch and the switch harness.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 3C1 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 3C1 mean?

Tajima 3C1 means: Power switched on while bar switch was held. It is a stop code, not necessarily a fault.

How do I clear Tajima 3C1?

Start with: Turn off the power switch, and then turn it on. Then: If code 3C1 is still displayed, check the bar switch and the switch harness.

When should I call a technician for Tajima 3C1?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.