Tajima thread error codes

The 9 Tajima rows tagged thread in the FaultDesk dataset. Thread codes cover breaks, run-out, the thread path, and the bobbin. Most are mechanical: a rough guide, a bad spool, or a tension that drifted.

What to check first

  • Stop and re-thread from the spool to the needle.
  • Check the bobbin, the bobbin case, and the thread path for lint.
  • Check the tension and the needle; replace a bent or burred needle.

System-level checks. Open the code page for the manual’s steps.

CodeMeaningType
1B4Stop due to thread trimming codestop code
291Upper thread Breakage is detected. Tension base card is faultyerror
293Under thread breakage is detectederror
3A1The thread trimming driver has issued abnormal signalserror
3F1Thread tension control failureerror
3A2Thread trimming output time exceedederror
3F3The thread tension release driver has received an abnormal signalerror
3A8A thread holding driver error signal is detectederror
391Thread release input signal errorerror

See all thread codes across brands, or the Tajima hub.

Machine down right now? Send the Tajima code and model. We’ll reply with the next step.
Request a repair callback →
Source: public manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.