Thread codes on embroidery machines
19 manual-derived thread codes and messages across Barudan, SWF, Tajima. Thread codes cover breaks, run-out, the thread path, and the bobbin. Most are mechanical: a rough guide, a bad spool, or a tension that drifted.
What to check first
- Stop and re-thread from the spool to the needle.
- Check the bobbin, the bobbin case, and the thread path for lint.
- Check the tension and the needle; replace a bent or burred needle.
General checks for the system, not a substitute for the code page or the manual.
Every thread code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D05 | Color Change Error | error |
| Barudan | D07 | Main motor overload | error |
| Barudan | D12 | Trimmer slider error | error |
| Barudan | D16 | Bobbin Break | error |
| Barudan | D22 | Trimmer motor error | error |
| Barudan | D25 | Stopped for Thread Break | stop code |
| Barudan | D40 | Chenille Thread Clamp Motor Error | error |
| SWF | 101 | Main board or overload | error |
| SWF | 102 | Main board or overload | error |
| SWF | 103 | Trimmer knife did not return | error |
| Tajima | 1B4 | Stop due to thread trimming code | stop code |
| Tajima | 291 | Upper thread Breakage is detected. Tension base card is faulty | error |
| Tajima | 293 | Under thread breakage is detected | error |
| Tajima | 3A1 | The thread trimming driver has issued abnormal signals | error |
| Tajima | 3F1 | Thread tension control failure | error |
| Tajima | 3A2 | Thread trimming output time exceeded | error |
| Tajima | 3F3 | The thread tension release driver has received an abnormal signal | error |
| Tajima | 3A8 | A thread holding driver error signal is detected | error |
| Tajima | 391 | Thread release input signal error | error |
FAQ
What does a thread code mean on an embroidery machine?
It means the controller found a problem in the thread system. The exact meaning depends on the brand, model, and code; the table above lists every thread row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.