Tajima 3F1: Thread tension control failure
What it means
The thread tension control failed, so the control cannot hold the tension it expects. The source says to adjust or replace the tension potentiometer.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged thread, tension. Browse all thread codes or all Tajima thread codes.
What the manual says to check
- Adjust/replace the tension potentiometer.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 3F1 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 3F1 mean?
Tajima 3F1 means: The thread tension control failed, so the control cannot hold the tension it expects. The source says to adjust or replace the tension potentiometer. It is an error code and should be cleared before production.
How do I clear Tajima 3F1?
Start with: Adjust/replace the tension potentiometer.
When should I call a technician for Tajima 3F1?
If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.