Tajima error list

Tajima 291: Upper thread Breakage is detected. Tension base card is faulty

error threadbobbintension Updated 2026-11-18
Quick answer Tajima 291 means Upper thread Breakage is detected. Tension base card is faulty. First check: Check the upper and under thread.

What it means

Upper thread Breakage is detected. Tension base card is faulty.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, bobbin, tension. Browse all thread codes or all Tajima thread codes.

What the manual says to check

  1. Check the upper and under thread.
  2. Replace the tension base card.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 291 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 291 mean?

Tajima 291 means: Upper thread Breakage is detected. Tension base card is faulty. It is an error code and should be cleared before production.

How do I clear Tajima 291?

Start with: Check the upper and under thread. Then: Replace the tension base card.

When should I call a technician for Tajima 291?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.