Tajima 3A2: Thread trimming output time exceeded
What it means
The thread-trimming output stayed on longer than the control allows. The source says to check or replace the joint card.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged thread, trimmer. Browse all thread codes or all Tajima thread codes.
What the manual says to check
- Check/replace joint card.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 3A2 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 3A2 mean?
Tajima 3A2 means: The thread-trimming output stayed on longer than the control allows. The source says to check or replace the joint card. It is an error code and should be cleared before production.
How do I clear Tajima 3A2?
Start with: Check/replace joint card.
When should I call a technician for Tajima 3A2?
If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.