Tajima error list

Tajima 321: PMD failure

error motor Updated 2026-11-18
Quick answer Tajima 321 means The PMD (pulse-motor driver) reported a failure. The source says to check the driver and the motor. First check: Check driver and motor.

What it means

The PMD (pulse-motor driver) reported a failure. The source says to check the driver and the motor.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor. Browse all motor codes or all Tajima motor codes.

What the manual says to check

  1. Check driver and motor.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 321 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 321 mean?

Tajima 321 means: The PMD (pulse-motor driver) reported a failure. The source says to check the driver and the motor. It is an error code and should be cleared before production.

How do I clear Tajima 321?

Start with: Check driver and motor.

When should I call a technician for Tajima 321?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.