Tajima error list

Tajima 381: FX head needle position input error

error needlemotorsensor Updated 2026-11-18
Quick answer Tajima 381 means The FX head's needle-position input data is wrong, or the needle-position signal is missing while the main shaft rotates. The source says to set the needle count correctly and check or replace the colour-change sensor. First check: Set the number of needles in the system software correctly.

What it means

The FX head's needle-position input data is wrong, or the needle-position signal is missing while the main shaft rotates. The source says to set the needle count correctly and check or replace the colour-change sensor.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, motor, sensor. Browse all needle codes or all Tajima needle codes.

What the manual says to check

  1. Set the number of needles in the system software correctly.
  2. Check/replace the color change sensor.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 381 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 381 mean?

Tajima 381 means: The FX head's needle-position input data is wrong, or the needle-position signal is missing while the main shaft rotates. The source says to set the needle count correctly and check or replace the colour-change sensor. It is an error code and should be cleared before production.

How do I clear Tajima 381?

Start with: Set the number of needles in the system software correctly. Then: Check/replace the color change sensor.

When should I call a technician for Tajima 381?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.