Tajima motor error codes

The 15 Tajima rows tagged motor in the FaultDesk dataset. Motor codes cover the main motor, the X/Y motors, and the trimmer motor. The controller saw a motor that did not move, moved too far, or drew too much current.

What to check first

  • Stop the machine and check for a jam before resetting.
  • Check the motor connector and the drive belt.
  • If the motor or drive board is named, call a technician.

System-level checks. Open the code page for the manual’s steps.

CodeMeaningType
2B8When the pre-reading buffer becomes emptyerror
211A fixed position signal is not detected. Main shaft Z signalerror
3D7There is abnormality in the main shaft motor speed control dataerror
311Encoder A signal status does not change for 5 seconds. Motor or…error
314Main shaft rotation failureerror
316A main shaft driver error is detectederror
321PMD failureerror
322An X-axis pulse motor driver error signal is detectederror
323A Y-axis pulse motor driver error signal is detectederror
372The nipples do not move more than 1 seconderror
381FX head needle position input errorerror
382The needle position signal status during color change does not…error
383Incorrect input of needle positionerror
53Stepping motor driver trouble (X, Y)error
58One turn of the main shaft motor takes over 5 secondserror

See all motor codes across brands, or the Tajima hub.

Machine down right now? Send the Tajima code and model. We’ll reply with the next step.
Request a repair callback →
Source: public manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.