Barudan XS/XY series

Barudan D13: No further Stitch Back or Automending due to 1600 stitch limit

message Updated 2026-11-18
Quick answer Barudan D13 means The machine cannot stitch back or automend any further because the 1,600-stitch limit has been reached. The source calls this a message and suggests the float operation to move back where needed. First check: Message that machine cannot stitch back or automend any further due to 1600 Stitch limit.

What it means

The machine cannot stitch back or automend any further because the 1,600-stitch limit has been reached. The source calls this a message and suggests the float operation to move back where needed.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

What the manual says to check

  1. Message that machine cannot stitch back or automend any further due to 1600 Stitch limit.
  2. If needing to stitch back/automend further, use float operation, and float back where needed.
  3. See operation manual for Float instructions.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D13 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D13 mean?

Barudan D13 means: The machine cannot stitch back or automend any further because the 1,600-stitch limit has been reached. The source calls this a message and suggests the float operation to move back where needed. It is an informational message, not a fault.

How do I clear Barudan D13?

Start with: Message that machine cannot stitch back or automend any further due to 1600 Stitch limit. Then: If needing to stitch back/automend further, use float operation, and float back where needed. Then: See operation manual for Float instructions.

When should I call a technician for Barudan D13?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.