Barudan XS/XY series

Barudan D04: Color Change Needle Sensor Error

error needlesensor Updated 2026-11-18
Quick answer Barudan D04 means The needle-select board in the colour-change assembly is not reporting exactly one active needle sensor. Rotate the assembly by hand to clear a bind, then check the board and sensor plate if the error remains. First check: Needle Select Board in Color Change Assembly has a sensor for each needle.

What it means

The needle-select board in the colour-change assembly is not reporting exactly one active needle sensor. Rotate the assembly by hand to clear a bind, then check the board and sensor plate if the error remains.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, sensor. Browse all needle codes.

What the manual says to check

  1. Needle Select Board in Color Change Assembly has a sensor for each needle.
  2. One sensor at a time should always be engaged and On.
  3. First manually rotate the Color change assembly to see if it clears up the problem.
  4. Do not force if color change is in a bind.
  5. See Error D05 for possible binds.
  6. If no binds and still getting this error, check the Needle select board to see if the sensor plate is bent or if any of the sensors are broken.
  7. Replace the Needle select board.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D04 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D04 mean?

Barudan D04 means: The needle-select board in the colour-change assembly is not reporting exactly one active needle sensor. Rotate the assembly by hand to clear a bind, then check the board and sensor plate if the error remains. It is an error code and should be cleared before production.

How do I clear Barudan D04?

Start with: Needle Select Board in Color Change Assembly has a sensor for each needle. Then: One sensor at a time should always be engaged and On. Then: First manually rotate the Color change assembly to see if it clears up the problem.

When should I call a technician for Barudan D04?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.