Barudan D05: Color Change Error
What it means
The machine failed while trying to make a colour change. The source lists possible binds, including stuck thread-keep or jump solenoids, broken take-up levers, a cover in the way, or the degree wheel in the wrong position, and says to rotate the assembly by hand to find the bind.
This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged thread, power. Browse all thread codes or all Barudan thread codes.
What the manual says to check
- Machine had an error trying to make a color change. Manually rotate the color change assembly to see if there are any binds in the color change movement. Possible Binds:.
- One or more of the thread keep solenoids is stuck or out of position causing it to jam a head from moving.
- One or more of the Jump solenoids is not engaging.
- One or more take up levers are broken.
- Sewing head side cover is interfering with head movement.
- The Degree wheel is the wrong position. Correct any of these conditions before continuing. May need to power down and back On to reset the machine, afterwards.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Barudan D05 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Barudan codes
FAQ
What does Barudan D05 mean?
Barudan D05 means: The machine failed while trying to make a colour change. The source lists possible binds, including stuck thread-keep or jump solenoids, broken take-up levers, a cover in the way, or the degree wheel in the wrong position, and says to rotate the assembly by hand to find the bind. It is an error code and should be cleared before production.
How do I clear Barudan D05?
Start with: Machine had an error trying to make a color change. Manually rotate the color change assembly to see if there are any binds in the color change movement. Possible Binds:. Then: One or more of the thread keep solenoids is stuck or out of position causing it to jam a head from moving. Then: One or more of the Jump solenoids is not engaging.
When should I call a technician for Barudan D05?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.