Barudan D28: No further Stitch Back or Automending due to Color Change
What it means
The machine cannot stitch back or automend any further because a colour change is in the way. The source says to do a manual trim before backing up.
This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged trimmer. Browse all trimmer codes.
What the manual says to check
- This is a message indicating that you cannot back up any further unless you do a manual trim Do a manual trim.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Barudan D28 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Barudan codes
FAQ
What does Barudan D28 mean?
Barudan D28 means: The machine cannot stitch back or automend any further because a colour change is in the way. The source says to do a manual trim before backing up. It is an informational message, not a fault.
How do I clear Barudan D28?
Start with: This is a message indicating that you cannot back up any further unless you do a manual trim Do a manual trim.
When should I call a technician for Barudan D28?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.