Barudan XS/XY series

Barudan D19: Stopped for Stop Code

stop code design Updated 2026-11-18
Quick answer Barudan D19 means The machine stopped because a stop code was reached in the design. The source calls it a programmed stop, not a machine fault. First check: Message that machine stopped due to stop code in design.

What it means

The machine stopped because a stop code was reached in the design. The source calls it a programmed stop, not a machine fault.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged design. Browse all design codes or all Barudan design codes.

What the manual says to check

  1. Message that machine stopped due to stop code in design.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D19 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D19 mean?

Barudan D19 means: The machine stopped because a stop code was reached in the design. The source calls it a programmed stop, not a machine fault. It is a stop code, not necessarily a fault.

How do I clear Barudan D19?

Start with: Message that machine stopped due to stop code in design.

When should I call a technician for Barudan D19?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.