Barudan XS/XY series

Barudan D32: Stopped for Sub End Code

stop code design Updated 2026-11-18
Quick answer Barudan D32 means The machine stopped because a sub end code was reached in the design while the Roll to Roll feature is on. The source calls it a programmed stop, not a fault. First check: Message that Roll to Roll feature is turned On, and machine stopped due to Sub End code in design data.

What it means

The machine stopped because a sub end code was reached in the design while the Roll to Roll feature is on. The source calls it a programmed stop, not a fault.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged design. Browse all design codes or all Barudan design codes.

What the manual says to check

  1. Message that Roll to Roll feature is turned On, and machine stopped due to Sub End code in design data.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D32 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D32 mean?

Barudan D32 means: The machine stopped because a sub end code was reached in the design while the Roll to Roll feature is on. The source calls it a programmed stop, not a fault. It is a stop code, not necessarily a fault.

How do I clear Barudan D32?

Start with: Message that Roll to Roll feature is turned On, and machine stopped due to Sub End code in design data.

When should I call a technician for Barudan D32?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.