Barudan XS/XY series

Barudan D25: Stopped for Thread Break

stop code threadtension Updated 2026-11-18
Quick answer Barudan D25 means The machine stopped because the thread-break detector saw a break. The source says to fix the thread and continue; a false break points to thread wrapped around the detect wheel or a low T-Break parameter. First check: Message that machine stopped due to thread break.

What it means

The machine stopped because the thread-break detector saw a break. The source says to fix the thread and continue; a false break points to thread wrapped around the detect wheel or a low T-Break parameter.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, tension. Browse all thread codes or all Barudan thread codes.

What the manual says to check

  1. Message that machine stopped due to thread break.
  2. Fix thread break and continue.
  3. If thread is not broke (false thread break) check that thread is wrapped around the thread detect wheel on the tension assembly.
  4. If false thread breaks occur on small stitches try increasing MC parameter #19, T-Break to a higher value.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D25 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D25 mean?

Barudan D25 means: The machine stopped because the thread-break detector saw a break. The source says to fix the thread and continue; a false break points to thread wrapped around the detect wheel or a low T-Break parameter. It is a stop code, not necessarily a fault.

How do I clear Barudan D25?

Start with: Message that machine stopped due to thread break. Then: Fix thread break and continue. Then: If thread is not broke (false thread break) check that thread is wrapped around the thread detect wheel on the tension assembly.

When should I call a technician for Barudan D25?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.