Barudan D36: Stopped for Bobbin Counter
What it means
The bobbin counter reached its set value, so the machine stopped and trimmed the bobbin. The source says to change the bobbin and start the machine to reset the counter.
This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged bobbin, trimmer. Browse all bobbin codes.
What the manual says to check
- When Bobbin counter feature is activated, machine stops, trims the bobbin and gives this message to let you know why it stopped.
- Change your bobbin, and start machine to reset.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Barudan D36 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Barudan codes
FAQ
What does Barudan D36 mean?
Barudan D36 means: The bobbin counter reached its set value, so the machine stopped and trimmed the bobbin. The source says to change the bobbin and start the machine to reset the counter. It is a stop code, not necessarily a fault.
How do I clear Barudan D36?
Start with: When Bobbin counter feature is activated, machine stops, trims the bobbin and gives this message to let you know why it stopped. Then: Change your bobbin, and start machine to reset.
When should I call a technician for Barudan D36?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.