Barudan XS/XY series

Barudan D29: Servo Driver Error

error framepower Updated 2026-11-18
Quick answer Barudan D29 means Something jammed the pantograph while sewing, or the servo electronics reported a fault. The source says to power off, check that the pantograph moves freely by hand, and remove any bind before restarting. First check: Something jammed the pantograph while sewing, or there is a problem with the Servo electronics.

What it means

Something jammed the pantograph while sewing, or the servo electronics reported a fault. The source says to power off, check that the pantograph moves freely by hand, and remove any bind before restarting.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged frame, power. Browse all frame codes or all Barudan frame codes.

What the manual says to check

  1. Something jammed the pantograph while sewing, or there is a problem with the Servo electronics.
  2. Power off machine and make sure pantograph is not jammed by trying to move by hand.
  3. Remove any binds before powering on again.
  4. If no binds, power back On and see if it’s OK.
  5. If still a problem, call tech support.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D29 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D29 mean?

Barudan D29 means: Something jammed the pantograph while sewing, or the servo electronics reported a fault. The source says to power off, check that the pantograph moves freely by hand, and remove any bind before restarting. It is an error code and should be cleared before production.

How do I clear Barudan D29?

Start with: Something jammed the pantograph while sewing, or there is a problem with the Servo electronics. Then: Power off machine and make sure pantograph is not jammed by trying to move by hand. Then: Remove any binds before powering on again.

When should I call a technician for Barudan D29?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.