Barudan XS/XY series

Barudan D41: Chenille Needle Height Error

error needleframesensor Updated 2026-11-18
Quick answer Barudan D41 means The chenille needle-bar height or cancel position is wrong. The source says to reboot, then check the needle-bar drive levers for a bind and the needle-height origin sensor before calling technical support. First check: This error occurs when the needle bar height or cancel position is wrong.

What it means

The chenille needle-bar height or cancel position is wrong. The source says to reboot, then check the needle-bar drive levers for a bind and the needle-height origin sensor before calling technical support.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, frame, sensor. Browse all needle codes.

What the manual says to check

  1. This error occurs when the needle bar height or cancel position is wrong.
  2. Turn off the machine and reboot.
  3. If still a problem, turn off the machine.
  4. Then manually rotate the (needle bar) leveling shaft on the problem head and see if the needle bar drive levers inside move smoothly and freely and not in a bind.
  5. Fix and correct any binds in the levers before turning the machine on again.
  6. Then, rotate the shaft to the lower position and see if the LED for Needle height origin sensor lights when engaged.
  7. Call Tech support for further help.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D41 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D41 mean?

Barudan D41 means: The chenille needle-bar height or cancel position is wrong. The source says to reboot, then check the needle-bar drive levers for a bind and the needle-height origin sensor before calling technical support. It is an error code and should be cleared before production.

How do I clear Barudan D41?

Start with: This error occurs when the needle bar height or cancel position is wrong. Then: Turn off the machine and reboot. Then: If still a problem, turn off the machine.

When should I call a technician for Barudan D41?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.