Barudan XS/XY series

Barudan D26: Pulse Motor Circuit Overheat

error motorframepower Updated 2026-11-18
Quick answer Barudan D26 means The pulse-motor circuit for the pantograph has overheated, so the machine stopped. The source says to power off, clean the fan and its opening, and check that the fan runs before restarting. First check: Message that the machine stopped because the pulse motor drive (pantograph) circuitry has over heated.

What it means

The pulse-motor circuit for the pantograph has overheated, so the machine stopped. The source says to power off, clean the fan and its opening, and check that the fan runs before restarting.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor, frame, power. Browse all motor codes or all Barudan motor codes.

What the manual says to check

  1. Message that the machine stopped because the pulse motor drive (pantograph) circuitry has over heated.
  2. Power off the machine to let it cool down.
  3. Check and clean the fan and fan opening to make sure lint or other debris is not blocking them.
  4. Afterwards, power back On, and check that the fan is working.
  5. If fan works and still getting D26 error, call tech support.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D26 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D26 mean?

Barudan D26 means: The pulse-motor circuit for the pantograph has overheated, so the machine stopped. The source says to power off, clean the fan and its opening, and check that the fan runs before restarting. It is an error code and should be cleared before production.

How do I clear Barudan D26?

Start with: Message that the machine stopped because the pulse motor drive (pantograph) circuitry has over heated. Then: Power off the machine to let it cool down. Then: Check and clean the fan and fan opening to make sure lint or other debris is not blocking them.

When should I call a technician for Barudan D26?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.