Bobbin codes on embroidery machines
8 manual-derived bobbin codes and messages across Barudan, SWF, Tajima. Bobbin codes cover the bobbin winder, the bobbin sensor, and the bobbin case. They are often a bobbin that is not seated or a winder that is not turning.
What to check first
- Check the bobbin is the right type and is seated.
- Check the winder and the bobbin sensor for lint.
- Check the bobbin case and the thread path.
General checks for the system, not a substitute for the code page or the manual.
Every bobbin code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D16 | Bobbin Break | error |
| Barudan | D36 | Stopped for Bobbin Counter | stop code |
| SWF | 101 | Main board or overload | error |
| SWF | 102 | Main board or overload | error |
| Tajima | 2C6 | Machine operation was attempted, although the bobbin changer was… | error |
| Tajima | 291 | Upper thread Breakage is detected. Tension base card is faulty | error |
| Tajima | 293 | Under thread breakage is detected | error |
| Tajima | 331 | Bobbin Changer error | error |
FAQ
What does a bobbin code mean on an embroidery machine?
It means the controller found a problem in the bobbin system. The exact meaning depends on the brand, model, and code; the table above lists every bobbin row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.