SWF support bulletins

SWF 102: Main board or overload

error threadbobbinneedletension Updated 2026-11-18
Quick answer SWF 102 means The control groups 102 with 101 as a main-board or overload fault and stops the machine. The support bulletin names a bird's nest, thread caught in the hook area, as the most common cause, usually from bobbin tension, a dirty bobbin case, or a bobbin that is not seated. First check: The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly.

What it means

The control groups 102 with 101 as a main-board or overload fault and stops the machine. The support bulletin names a bird's nest, thread caught in the hook area, as the most common cause, usually from bobbin tension, a dirty bobbin case, or a bobbin that is not seated.

This page is generated from a public source: SWF / Coldesi support — Errors 101, 102, 103 and 300. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, bobbin, needle, tension. Browse all thread codes.

What the manual says to check

  1. The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly.
  2. Remove the excess thread from under the needle plate, remove the bobbin and case, clean the case, re-seat the bobbin, set the bobbin tension, then check the pre-tension and main tension.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send SWF 102 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related SWF codes

FAQ

What does SWF 102 mean?

SWF 102 means: The control groups 102 with 101 as a main-board or overload fault and stops the machine. The support bulletin names a bird's nest, thread caught in the hook area, as the most common cause, usually from bobbin tension, a dirty bobbin case, or a bobbin that is not seated. It is an error code and should be cleared before production.

How do I clear SWF 102?

Start with: The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly. Then: Remove the excess thread from under the needle plate, remove the bobbin and case, clean the case, re-seat the bobbin, set the bobbin tension, then check the pre-tension and main tension.

When should I call a technician for SWF 102?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: SWF / Coldesi support — Errors 101, 102, 103 and 300. SWF support bulletins. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.