Barudan D16: Bobbin Break
What it means
The machine stopped because the bobbin thread broke. The source says to fix or replace the bobbin thread; the detector or parameter that watches the bobbin must be enabled for this message.
This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged thread, bobbin. Browse all thread codes or all Barudan thread codes.
What the manual says to check
- Message that machine stopped due to bobbin thread break.
- Fix or replace bobbin thread.
- (Optional Bobbin detector installed or parameter turned ON).
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Barudan D16 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Barudan codes
FAQ
What does Barudan D16 mean?
Barudan D16 means: The machine stopped because the bobbin thread broke. The source says to fix or replace the bobbin thread; the detector or parameter that watches the bobbin must be enabled for this message. It is an error code and should be cleared before production.
How do I clear Barudan D16?
Start with: Message that machine stopped due to bobbin thread break. Then: Fix or replace bobbin thread. Then: (Optional Bobbin detector installed or parameter turned ON).
When should I call a technician for Barudan D16?
If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.