SWF support bulletins

SWF 101: Main board or overload

error threadbobbinneedletension Updated 2026-11-20
Quick answer SWF 101 means The control reports a main-board fault or an overload and stops the machine. The support bulletin groups 101 with 102 and names a bird's nest, thread caught in the hook area, as the most common cause; the hook area and tensions are the first checks. First check: The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly.

What it means

The control reports a main-board fault or an overload and stops the machine. The support bulletin groups 101 with 102 and names a bird's nest, thread caught in the hook area, as the most common cause; the hook area and tensions are the first checks.

This page is generated from a public source: SWF / Coldesi support — Errors 101, 102, 103 and 300. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, bobbin, needle, tension. Browse all thread codes.

What the manual says to check

  1. The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly.
  2. Remove the excess thread from under the needle plate, remove the bobbin and case, clean the case, re-seat the bobbin, set the bobbin tension, then check the pre-tension and main tension.
From the shop floor. On a single-head 1201, one owner cleared 101 by turning the timing wheel on the left side of the machine, with an Allen key, until the red arrow lined up with the black line. The support bulletin describes 101 as a main board or overload error, so read this as a shop-floor report for one model, not the official meaning. Original thread.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send SWF 101 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related SWF codes

FAQ

What does SWF 101 mean?

SWF 101 means: The control reports a main-board fault or an overload and stops the machine. The support bulletin groups 101 with 102 and names a bird's nest, thread caught in the hook area, as the most common cause; the hook area and tensions are the first checks. It is an error code and should be cleared before production.

How do I clear SWF 101?

Start with: The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly. Then: Remove the excess thread from under the needle plate, remove the bobbin and case, clean the case, re-seat the bobbin, set the bobbin tension, then check the pre-tension and main tension.

When should I call a technician for SWF 101?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: SWF / Coldesi support — Errors 101, 102, 103 and 300. SWF support bulletins. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.