Tension codes on embroidery machines
9 manual-derived tension codes and messages across Barudan, SWF, Tajima. Tension codes cover the upper and lower tension. The machine is reporting a tension it cannot explain, not necessarily a broken sensor.
What to check first
- Check the thread path and the bobbin case for lint.
- Check the tension discs and the check spring.
- Test with the thread and bobbin the manual specifies.
General checks for the system, not a substitute for the code page or the manual.
Every tension code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D25 | Stopped for Thread Break | stop code |
| Barudan | D40 | Chenille Thread Clamp Motor Error | error |
| Barudan | D45 | Lock Stitch Zig-Zag Tension | error |
| SWF | 101 | Main board or overload | error |
| SWF | 102 | Main board or overload | error |
| Tajima | 291 | Upper thread Breakage is detected. Tension base card is faulty | error |
| Tajima | 3F1 | Thread tension control failure | error |
| Tajima | 3F2 | Improper tension (tightness) error | error |
| Tajima | 3F3 | The thread tension release driver has received an abnormal signal | error |
FAQ
What does a tension code mean on an embroidery machine?
It means the controller found a problem in the tension system. The exact meaning depends on the brand, model, and code; the table above lists every tension row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.